Manual.ly Logo

Mafell KSS40 18Mbl Bruksanvisning

0,0 · 0 Betyg

PDF-manual · 110 Sidor

Svenska

M: QW-35-FL
sida

/ 110

Loading...
575b20371ef5fc844bc5aace7612e9356326 page 15
-21-
- Remove the rechargeable batteries from the
machine before carrying out any setting, retooling,
maintenance or cleaning tasks.
- Ensure that the machine is switched off when you
push in the rechargeable battery.
Do not use:
- Cracked and misshapen saw blades.
- Saw blades made of high speed steel (HSS saw
blades).
- Blunt saw blades as they impose an excessive
load on the motor.
- Saw blades with a basic body with a thickness
greater than, or a cutting width (setting) less than,
the thickness of the riving knife / splitter.
- Saw blades which are not suitable for the saw
blade's idling speed.
Instructions on the use of personal protective
equipment:
- Always wear ear protectors during work.
- Always where a dust mark during work.
Instructions on operation:
- Do not reach with your hands into the sawing area
and do not touch the saw blade. With your other
hand, support the supplementary handle or the
motor casing.
- Do not reach under the workpiece.
- Adapt the cutting depth to the workpiece thickness.
- Never support the workpiece in your hand or over
your leg. Secure the workpiece against a sturdy
support.
- When sawing with connected guide rail, the
machine may only be removed from the workpiece
if it is in home position and the retractable saw
guard is closed.
- Only hold the device by its isolated handle
surfaces when carrying out work during which the
cutting tool could hit concealed power cables.
- Always use a limit stop or a straight edge guide for
longitudinal cutting.
- Always use correctly sized saw blades with
matching mounting hole (e.g. star-shaped or
round).
- Never use damaged or incorrect saw blade
washers or screws.
- Hold the saw with both hands and bring your arms
into a position where you are able to resist the
backlash forces. Always stay on the side of the
saw blade, never bring the saw blade in line with
your body.
- If the saw blade jams or sawing is interrupted for
another reason, release the on/off switch and keep
the saw steady in the workpiece until the saw
blade stands completely still. Never try to remove
the saw from the workpiece or to pull it backwards
while the saw blade is still moving or while a
backlash could occur.
- If you would like to restart a saw that is stuck in the
workpiece, centre the saw blade in the saw slit and
check whether the saw teeth are stuck in the
workpiece.
- Support large plates to reduce the risk of backlash
caused by a jammed saw blade.
- Do not use any blunt or damaged saw blades.
- Before starting to saw, tighten the cutting depth
and cutting angle adjustments.
- Be especially careful when making a "plunge cut"
into a concealed area, e.g. into an existing wall.
- Prior to every use, check whether the lower saw
guard is closing properly. Do not use the saw if the
lower saw guard is not freely movable and does
not close immediately. Never clamp or tie down the
lower saw guard in an open position.
- Check the function of the spring for the lower saw
guard. Have the device serviced if the bottom saw
guard and the spring are not in perfect working
order.
- Only manually open the lower saw guard for
special cuts, such as "plunge and angle cuts".
Open the lower saw guard using the retracting
lever and release the lever as soon as the saw
blade has penetrated the workpiece.
- Do not place the saw on the work bench or on the
floor without the lower saw guard covering the saw
blade.
- Use the saw blade that matches the riving
knife/splitter.
- Adjust the riving knife/splitter as described in the
operating instructions.

Chatta med din Mafell KSS40 18Mbl-manual med hjälp av AI

Få omedelbara AI-svar från din Mafell KSS40 18Mbl-manual

Fråga vad som helst om Mafell KSS40 18Mbl. Svaren kommer från denna bruksanvisning, med de sidor de bygger på.

KSS40 18Mbl Underhallsschema

Paminn mig nar underhall ska utforas
Årligen (ca)
Professionell inspektion av auktoriserad service

Efter längre driftperioder, lämna maskinen till en auktoriserad MAFELL-servicebutik för inspektion.

Visa i manualen (sida 25)
Före varje användning
Kontrollera nedre sågskydds funktion

Verifiera att det nedre skyddet stänger korrekt och rör sig fritt före varje operation. Använd inte om det fastnar eller inte stänger omedelbart.

Visa i manualen (sida 21)
Efter lång lagring
Rengör maskin och skydda metalldelar

Om den inte använts på länge, rengör maskinen noggrant och spraya blottade metallpartier med rostskyddsmedel.

Visa i manualen (sida 25)

Kostnadsfria underhallspaminnelser

Anpassat efter ditt inkopsdatum. Alltid kostnadsfritt, avsluta prenumerationen nar som helst.

Genom att skicka in godkanner du integritetspolicyn. Avsluta prenumerationen med ett klick i valfritt e-postmeddelande.
M: QW-35-FL

Ställ en Fråga

0/1000

Rekommenderar du KSS40 18Mbl?

Ja Nej

Vanliga frågor

A

Mafell KSS40 erbjuder ett maximalt skär djup på 42 mm vid 0 grader och 29 mm vid en vinkel på 45 grader. Detta möjliggör djupa snitt i massivt trä och olika panelmaterial samtidigt som stabiliteten bibehålls.

Är detta svar till hjälp?

A

Standardpaketet inkluderar två 18V 5.2Ah litiumjonbatterier. Denna dubbla batterisättning säkerställer att du har en reserv redo medan det andra laddas, vilket minimerar driftstopp på arbetsplatsen.

Är detta svar till hjälp?

A

Ja, KSS40 är helt kapabel till nedsänkningssnitt. Du måste öppna den nedre skyddsguiden manuellt med spaken, placera maskinen mot en stopp och trycka sedan på nedsänkningen för att sänka bladet vertikalt in i materialet.

Är detta svar till hjälp?

A

KSS40 är specifikt optimerad för Mafell FLEXI railsystemet. Även om den kan skära fritt eller med en parallell stopp, kan användning av tredjeparts skenor påverka precisionen och passformen hos guid-elementen.

Är detta svar till hjälp?

A

Nyckelsäkerhetsfunktioner inkluderar en övre fast stängsel, en nedre återkalleliga stängsel, en elektronisk broms som stoppar bladet snabbt, en splittringskniv för att förhindra sparkback och isolerade handtag för att skydda mot dolda kablar.

Är detta svar till hjälp?

M: QW-35-FL

Fördelar och Nackdelar

Fördelar

  • Hög vridmoment 18V motor levererar 6700 RPM för snabba, rena snitt i massivt trä och paneler
  • Inkluderar två 5.2Ah batterier och en snabb laddare för förlängd kontinuerlig arbete tid
  • Avancerade säkerhetsfunktioner inkluderar automatisk blad broms och återkallelig nedre stängsel
  • Kompatibel med FLEXI railsystem för ultra-precisa långa snitt upp till 140 cm
  • Lättvikt design på 2.8 kg minskar användartrötthet under förlängda överhuvudarbete
VS

Nackdelar

  • Högre initial investeringskostnad jämfört med standard kopplade cirkel sågar
  • Kräver specifika Mafell tillbehör och blad för optimal kompatibilitet
  • Batteritid kan minska signifikant vid extremt kalla temperaturer under 0°C
  • Maximalt skär djup är begränsat till 42 mm vilket kan vara otillräckligt för tjockt timmer
  • Dammsugnings effektivitet beror starkt på användning av en extern dammavledare
M: QW-35-FL

Produkt Specifikation

Typ

Cirkelsåg

Batteri

2x batteri (18 V, 5,2 Ah, Li-Ion)

Tomgångshastighet

6700 varv/min

Sågdiameter

12 cm

Skärkapacitet

4,2 cm (skär djup vid 0 grader), 2,7 cm (skär djup vid 45 graders lutning)

Vinkeljustering

0-45 grader

Axelhål

20 mm

Funktioner

Ställbar skena, dammutblåsning, vinkeljustering

Vikt

3,65 kg

Innehåll i förpackning

Fodral (T-Max), laddare, 2x batteri, dammpåse, guideskena (FX140)

M: QW-35-FL

Produkt Beskrivning

Mafell KSS40 18Mbl Akku-Handkreissäge: Precision Power in Your Hands

The Mafell KSS40 18Mbl is a top-tier cordless cross-cutting system designed for professional carpenters and woodworkers who demand absolute precision. This versatile tool combines the freedom of battery power with the robust performance of a high-end table saw. Equipped with two 5.2Ah batteries, a dedicated charger, and a durable transport case, this kit is ready to tackle any project from fine joinery to heavy-duty framing.

At the heart of the KSS40 lies an 18-volt motor capable of reaching 6700 RPM at no load. It features a cutting depth of up to 42 mm at 0 degrees and 29 mm at 45 degrees, allowing for deep bevel cuts in solid wood and panel materials alike. The machine includes essential accessories like a carbide-tipped circular saw blade with 24 teeth, a riving knife to prevent kickback, and a parallel stop for consistent rip cuts. For even greater accuracy, the system supports the FLEXI rail FX 140, enabling perfectly straight cuts up to 140 cm without the need for a separate guide rail setup.

Safety is paramount in the design of the KSS40. It comes equipped with both upper fixed and lower retractable saw guards that automatically cover the blade when not in use. The electronic brake ensures the blade stops almost instantly after releasing the trigger. The handle is ergonomically designed with isolated surfaces to protect against hidden electrical cables, and the machine weighs only 2.8 kg without the parallel stop, making it easy to maneuver on-site.

Whether you are creating shadow gaps, performing plunge cuts into existing walls, or executing precise mitre joints, the KSS40 adapts to your needs. The included chip extraction port allows for connection to dust extractors, keeping your workspace clean and reducing health risks associated with wood dust. With its comprehensive set of safety instructions and low vibration levels below 2.5 m/s², this saw ensures a comfortable and secure working experience.

M: QW-35-FL

© Copyright 2026 Manual.ly