Manual.ly Logo

Webasto Pure Bruksanvisning

0,0 · 0 Betyg

PDF-manual · 66 Sidor

Svenska

M: QW-35-FL
sida

/ 66

Loading...
e960bb56323879fb72c33dcf0aaadd4134da page 3
Webasto Pure 3
1 General information
1.1 Purpose of the document
These operating and installation instructions are part of the
product and contain information for the user to ensure safe
operation and for the authorised electrician to carry out
safe installation of the Webasto Pure charging station.
1.2 Using this document
Carefully read the operating and installation instructions
before installing and starting up the Webasto Pure.
Keep these instructions ready to hand.
Hand these instructions on to the following owner or
user of the charging station.
1.3 Intended use
The Webasto Pure charging station is designed for charging
electric vehicles in accordance with IEC 61851-1, charge
mode 3. In this charge mode, the charging station ensures:
■■
The voltage is not applied before the vehicle has been
connected correctly.
■■
The maximum power is calibrated.
The AC/DC converter is in the vehicle.
1.4 Use of symbols and highlighting
DANGER
Hazard with a high degree of risk which, if not avoi-
ded, will lead to death or serious injury.
WARNING
Hazard with a moderate degree of risk which, if not
avoided, may lead to minor or moderate injury.
CAUTION
Hazard with a low degree of risk which, if not avoi-
ded, will lead to minor or moderate injury.
The note denotes a special technical feature or
potential damage to the product.
Reference to separate documentation
Description of a precondition
Description of an action
1.5 Warranty and liability
Webasto shall not accept liability for defects or dama-
ge due to the failure to comply with the operating and
installation instructions. This liability exclusion particularly
applies to:
■■
Improper use.
■■
Installation and initial operation by a non-authorised
electrician.
■■
Repairs not carried out by a Webasto service workshop.
■■
Use of non-original spare parts.
■■
Conversion of the unit without permission from
Webasto.
2 Safety
2.1 General information
Only persons over the age of 18 are permitted to use the
charging station.
The Webasto Pure charging station has been developed,
produced, tested and documented according to the
relevant safety regulations and environmental requirements.
The device must only be used in a technically faultless
condition.
Have any faults that adversely affect the safety of persons
or of the device rectified immediately by an authorised elec-
trician in accordance with nationally applicable regulations.
It is possible that the signalling in the vehicle differs
from that described here. Always read the operating
instructions of the respective vehicle manufacturer
and always observe these.
2.2 General safety information
■■
Hazardous voltages are present within the casing.
■■
Check charging station for visual damage before
use. Do not use the charging station if damaged.
■■
Installation, electrical connection and initial ope-
ration of the charging station must only be carried
out by an authorised electrician.
■■
Do not remove the cover of the installation area
whilst in operation.
■■
Do not remove markings, warning symbols and
the rating plate from the charging station.
■■
The charging cable must only be replaced by an
authorised electrician in accordance with the
installation instructions.
■■
It is strictly prohibited to connect other equip-
ment/devices to the charging station.
■■
When not in use, store the charging cable in the
designated holder and lock the charging coupling
in the charging station. Loosely wind the charging
cable around the charger casing so that it does
not touch the ground.
■■
Make sure that the charging cable and coupling
cannot be driven over, trapped and are protected
from any other hazards.
■■
Immediately notify Webasto Customer Service
if the charging station, charging cable or the
charging coupling are damaged. Do not continue
using the charging station.
■■
The vehicle must be unoccupied during the char-
ging procedure.
■■
Prevent the charging cable and coupling from co-
ming in contact with external heat sources, water,
dirt and chemicals.
■■
Do not attach extension cables or adapters to the
charging cable.
■■
Remove the charging cable by pulling on the
charging coupling only.
■■
Never clean the charging station with a high-
pressure cleaner or similar device.
■■
Switch off electrical power when cleaning the
charging sockets in the charger coupling.

Chatta med din Webasto Pure-manual med hjälp av AI

Få omedelbara AI-svar från din Webasto Pure-manual

Fråga vad som helst om Webasto Pure. Svaren kommer från denna bruksanvisning, med de sidor de bygger på.

Pure Underhallsschema

Före varje användning
Kontrollera laddningsstationen för synliga skador

Inspektera laddningsstationen, kabeln och kopplingen för synliga skador före varje användning. Använd inte om den är skadad.

Visa i manualen (sida 3)
Vid behov
Rengör höljet med en torr trasa

Torka av enheten endast med en torr trasa. Använd aldrig högtryckstvättar, aggressiva rengöringsmedel, vax eller lösningsmedel.

Visa i manualen (sida 9)
M: qwen/qwen3.8-flash

Ställ en Fråga

0/1000

Rekommenderar du Pure?

Ja Nej

Vanliga frågor

A

Nej, installation och elektrisk anslutning måste strikt utföras av en auktoriserad elektriker för att säkerställa säkerhet och efterlevnad av lokala föreskrifter.

Är detta svar till hjälp?

A

En purpur LED indikerar att laddningsströmgränsen är aktiverad, vilket vanligtvis begränsar ingången till 20 A för enfas-laddningskonfigurationer.

Är detta svar till hjälp?

A

Tryck och håll ner touchkontrollbrytaren i minst 10 sekunder för att initiera ett systemsjälvtest och återställa fel efter att de har åtgärdats.

Är detta svar till hjälp?

A

Ja, den har IP54-klassificering som tillåter användning i skyddade utomhusområden som carports, men den bör inte utsättas för direkt regn eller högtryckstvätt.

Är detta svar till hjälp?

A

Du kan konfigurera strömmen med hjälp av DIP-brytare, men vissa modeller har fabriksgränser som inte kan överskridas, såsom att uppgradera en 11 kW-enhet till 22 kW.

Är detta svar till hjälp?

M: QW-35-FL

Fördelar och Nackdelar

Fördelar

  • Integrerad övervakning av restström förbättrar säkerheten mot DC-fel
  • Slank svart finish passar moderna arkitektoniska stilar sömlöst
  • DIP-brytare tillåter flexibel konfiguration för enfas- eller trefassystem
  • IP54-skyddsklass säkerställer hållbarhet mot damm och vatten
  • Intuitiva LED-indikatorer ger tydliga visuella statusuppdateringar
VS

Nackdelar

  • Installation kräver en certifierad elektriker vilket tillför initial kostnad
  • LED-varningsfärg kan inte dämpas till skillnad från standby-färger
  • Maximal effekt kan vara begränsad till 20 A för enfassatningar som standard
  • Enheten kan inte uppgraderas från 11 kW till 22 kW via mjukvara efter fabrikskonfiguration
  • Utbyte av laddkabbel är begränsat till auktoriserade yrkesverksamma endast
M: QW-35-FL

Produkt Specifikation

Antal laddningspunkter

1

Laddningsläge

IEC 61851-1 (Läge 3)

Antal faser

3-fas

Spänning

400V (AC)

Kontaktdonstyp

Typ 2

Anslutningstyp

Kabel 4,5 m

Installation

Väggmonterad

Auktorisering

Nyckelbrytare

Skyddsklass

IP54

Dimensioner

22,5x44,7x11,6 cm (BxDjxH)

M: QW-35-FL

Produkt Beskrivning

Upptäck Webasto Pure Black Edition Manual

Webasto Pure Black Edition representerar en toppnivå inom laddningsteknik för elbilar, där slank estetik kombineras med robust prestanda. Designad för både bostads- och kommersiella miljöer säkerställer denna laddstation säker, effektiv och tillförlitlig strömförsörjning till din elbil. Manualen fungerar som din omfattande guide för att låsa upp hela enhetens potential, med detaljerade insikter om installation, drift och underhåll utan onödigt fackspråk.

Drift inom strikta säkerhetsparametrar enligt IEC 61851-1-standarderna använder Webasto Pure avancerad laddningsläge 3-teknik. Detta säkerställer att spänning endast appliceras när fordonet är säkert anslutet, vilket skyddar både bilen och användaren från elektriska faror. Enheten har ett intuitivt LED-indikatorssystem som kommunicerar status på en glimt, från standby-blått till aktivt grönt och fel-rött. Oavsett om du konfigurerar den för enfas- eller trefas-försörjning, tillåter DIP-brytarinställningar exakt strömkalibrering upp till 22 kW.

Säkerhet är avgörande i designfilosofin hos Webasto Thermo & Comfort SE. Pure Black Edition inkluderar integrerad övervakning av restström för att förhindra farliga likströmsfelströmmar. Installation måste utföras av en kvalificerad elektriker som kan säkerställa korrekt jordning och efterlevnad av lokala föreskrifter kring säkringar och RCD. Enheten är byggd för att tåla hårda förhållanden med IP54-klassificering, vilket gör den lämplig för garage, carports och skyddade utomhusområden medan den motstår damm och vattenstrålar.

Utöver standardladdning erbjuder Webasto Pure anpassningsbara funktioner tillgängliga via dess nyckelstyrda brytare. Användare kan gå in i programmeringsläge för att justera LED-ljusstyrka eller inaktivera gränsen för 20 A laddningsström på vissa varianter, såvida lokala lagar tillåter det. Den medföljande monteringskitet förenklar vägginstallation och säkerställer att enheten förblir stabil och säker. Genom att följa riktlinjerna i Webasto Pure Black Edition-manualen kan ägare njuta av en sömlös laddningsupplevelse som prioriterar livslängd, säkerhet och effektivitet.

M: QW-35-FL

© Copyright 2026 Manual.ly